DoPhin PS2012 Protein Skimmer
Features:
-
Compact and elegant design for easy operation.
-
Multifunctional: Separates organics and filters water efficiently.
-
Removes noxious protein and waste substances with extreme efficiency.
-
Increases oxygen in the water for the benefit of aquatic creatures.
-
Unique needle impeller generates fine, abundant air bubbles to enhance separation efficiency.
-
Specifically designed for saltwater use.
Operation:
-
Clean the skimmer carefully before using. Do not use any chemical cleansers.
-
Fix the skimmer on the aquarium wall and adjust the screw to keep the skimmer in place and balanced.
-
Remove the impurity case cover, then fill the pump casing with water until it is 50mm above the water pump.
-
Turn the air-inlet controller to "CLOSE" and then connect the power supply.
-
Start the water pump to fill the tube with water.
-
Turn the air-inlet controller to "OPEN" to allow air in, and the protein skimmer will begin working.
- Allow the skimmer to run for a minimum of 24 hours for the break-in period, during which a wet foam froth should form and be cleaned off.
- After the break-in period, the wet foam will decrease, and a sludge-like foam will be produced, which should be cleaned off occasionally.
Performance Data:
-
Model: PS-2012
-
Voltage: 220-240V/50Hz
-
Power: 6.6W
-
Output: 500L/Hr